Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

TruVativ Steel Chainring Bolt Set
$8.49
- Use without washers for two chainrings, with washers for one DH ring - Bolts and nuts use hex keys - Includes 15 pieces total; 5 nuts, 5 bolts, 5 washers - Length: 8mm - Material: Steel - Type: Hex
MRP 2x Inner Wear Plate
$8.50
Replacement inner wear plate for MRP chain guides.
Ritchey WCS Carbon Headset Spacers 1-1/8-inch 10mm
$8.95
Carbon head set spacers for 1-1/8" steerer. - For 1-1/8" steerer - 10mm thick - 2pcs per bag - 33mm OD
ESI Silicone Tape
$8.99
Keep adhesives off your bike!This is the finishing tape included in our RCT Wrap Kits! If you remove the protective backing and feel the material it feels exactly the same on both sides. There are no adhesives! If you touch it to itself you have just a few seconds to peel it away before it starts to bond. It bonds to itself, but not to your bike or to your components. No more cleanups. No more nasty glue stuck all over your bike or products.
Cane Creek DB Volume Reduction Spacer Kit
$9.00
Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive. - Spacers can be cut to fine-tune spring curve
Cane Creek IS47-IS41 Head Tube Converter
$9.00
Allows the lower of a 47mm IS headtube to be converted to use a standard 41mm 36x45 degree headset bearing.
RockShox Reverb Hose Barb Post
$9.08
RockShox Reverb Hose Parts
Wheels Manufacturing Inc. Wheels Growler Seat Binder Bolt
$9.26
- Machined aluminum ends with 50mm steel bolt
FSA Microspacer Headset Spacers
$9.49
- Microspacers ensure the correct fitment of integrated headsets - Use between the top cover and the compression ring to ensure the top cover does not contact the headtube - Sold in bags of 10
Ritchey Di2 Internal Seatpost Battery Mount
$9.95
- Securely hide your Di2 Battery within your seatpost - Di2 battery sold separately
Ritchey Fork Crown Race for 1-1/8-inch straight steerer ZS44/30
$9.95
Fork crown race for genuine Ritchey headsets. - For cartridge type headsets with a 45° taper - Alloy - ZS44/30
Ritchey Replacement Stem Bolts: 7 Pieces for Superlogic C260
$9.95
Replacement bolts for Super Logic stems. Original equipment stem hardware ensures exact fit and finish. - Replacement T20 bolts for Super Logic stems - Includes T20-M4x15L x 4pcs & T20-M4x18L x 3pcs - Bit Size: Torx 20 - Thread Pitch: M4 - Length: 18mm (x3), 15mm (x4)
Ritchey WCS Replacement Stem Bolts: C220 and Matrix C220 Stem
$9.95
Replacement bolts for Super Logic stems. Original equipment stem hardware ensures exact fit and finish. - Bit Size: 4mm - Thread Pitch: M5 - Length: 4x 16mm, 2x 18mm
Ritchey WCS Replacement Stem Bolts: C260 Stem
$9.95
Replacement bolts for Super Logic stems. Original equipment stem hardware ensures exact fit and finish. - Bit Size: Torx 20 - Thread Pitch: M4 - Length: 15mm
Wolf Tooth Components Ultralight Stem Cap With Integrated Spacer
$9.95
This stem cap is where your bike fashion sense and the weight weenie in you collide. This Ultralight and ultra-sleek stem cap integrates a 5mm, 10mm or 15mm headset spacer with your stem cap in finely machined piece. Why have extra steerer tube requiring spacers on top of your stem you ask? Well, many carbon steerers require that the steer tube extend above the stem. Also, riders may want the flexibility to move handlebar height up and down for different types of riding or for bike re-sale. - Design and manufactured in Minneapolis, MN USA - 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only - 6061-T6 aluminum - 5mm internal cylinder wall height - Black aluminum bolt included Total weight (cap + bolt): 5mm= 12g. Compare to a standard flat stem cap and steel bolt at 20 grams + spacers add even more.
FSA BB/PF30 to 386EVO Road Adapter
$9.99
Your frame is BB30 or PF30. Your crank is 386EVO. No sweat. This adapter from FSA makes it happen. - For road use - Weight: 50g
Greenfield KS2 Kickstand
$9.99 - $10.49
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
Greenfield KS3 Kickstand
$9.99
The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
Greenfield Kickstand w/RetroKit
$9.99 - $10.99
This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
Third Eye Chainwatcher
$9.99
- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes
MRP Chainring Bolt Kits
$10.00
Replacement chainring bolt kits
Specialized Carbon Steerer Tube Plug
$10.00
Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.
Wheels Manufacturing Inc. Carbon Fiber Headset Spacer 1-1/8
$10.00
- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes five (5) 1-1/8" x 2.5mm spacers
Wheels Manufacturing Inc. Carbon Fiber Headset Spacers 1-1/8
$10.00
- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes five (5) 1-1/8" x 5mm spacers
Wheels Manufacturing Inc. M8 Bolt for Dropouts 192, 275, 276
$10.00
M8 Bolt for DROPOUT-192, DROPOUT-275, DROPOUT-276 - Threads: M8x0.75 - Length Under Head: 1.110-inch - Head Diameter: 0.415-inch - Replaces Syntace X-12 Typ I screw - Sold Individually - Made in the USA
MRP Replacement Rollers
$10.50
- Replacement roller kits for mrp guide systems (includes bearings and hardware) - Lightweight version averages 20g less per roller (with hardware)
Wheels Manufacturing Inc. Aluminum Headset Spacer Set
$11.00
Wheels Manufacturing 1-1/8 4-Piece Headset Spacer Kit includes an assortment of black anodized aluminum headset spacers for 1-1/8" fork steerers. Includes one each: - 2.5mm - 5mm - 7.5mm - 10mm
Hayes Master Cylinder Body/Lever Parts
$12.00 - $16.00
- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts
Salsa Cane Creek +3mm 40mm Lower Race Custom for Salsa
$12.00
Custom Cane Creek lower race for Salsa.
Wheels Manufacturing Inc. 31.8 – 25.4 Handlebar Shim
$12.00
Shims for fitting 25.4mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 25.4mm - Length: 48mm - Machined Aluminum - Anodized Black